Note
|
Preface
Insert Preface Text here. Give OGC specific commentary: describe the technical content, reason for document, history of the document and precursors, and plans for future work. |
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The Open Geospatial Consortium shall not be held responsible for identifying any or all such patent rights.
Recipients of this document are requested to submit, with their comments, notification of any relevant patent claims or other intellectual property rights of which they may be aware that might be infringed by any implementation of the standard set forth in this document, and to provide supporting documentation.
Abstract
<Insert Abstract Text here>
Scope
Note
|
Insert Scope text here. Give the subject of the document and the aspects of that scope covered by the document. |
Conformance
This standard defines XXXX.
Requirements for N standardization target types are considered:
-
AAAA
-
BBBB
Conformance with this standard shall be checked using all the relevant tests specified in Annex A (normative) of this document. The framework, concepts, and methodology for testing, and the criteria to be achieved to claim conformance are specified in the OGC Compliance Testing Policies and Procedures and the OGC Compliance Testing web site.
In order to conform to this OGC® interface standard, a software implementation shall choose to implement:
-
Any one of the conformance levels specified in Annex A (normative).
-
Any one of the Distributed Computing Platform profiles specified in Annexes TBD through TBD (normative).
All requirements-classes and conformance-classes described in this document are owned by the standard(s) identified.
References
The following normative documents contain provisions that, through reference in this text, constitute provisions of this document. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. For undated references, the latest edition of the normative document referred to applies.
Note
|
Insert References here. If there are no references, leave this section empty. References are to follow the Springer LNCS style, with the exception that optional information may be appended to references: DOIs are added after the date and web resource references may include an access date at the end of the reference in parentheses. See examples from Springer and OGC below. |
-
[Identification of Common Molecular Subsequences], Identification of Common Molecular Subsequences. Smith, T.F., Waterman, M.S., J. Mol. Biol. 147, 195–197 (1981)
-
[ZIB Structure Prediction Pipeline], ZIB Structure Prediction Pipeline: Composing a Complex Biological Workflow through Web Services. May, P., Ehrlich, H.C., Steinke, T. In: Nagel, W.E., Walter, W.V., Lehner, W. (eds.) Euro-Par 2006. LNCS, vol. 4128, pp. 1148–1158. Springer, Heidelberg (2006)
-
[The Grid], The Grid: Blueprint for a New Computing Infrastructure., Foster, I., Kesselman, C.. Morgan Kaufmann, San Francisco (1999).
-
[Grid Information Services for Distributed Resource Sharing], Grid Information Services for Distributed Resource Sharing. Czajkowski, K., Fitzgerald, S., Foster, I., Kesselman, C. In: 10th IEEE International Symposium on High Performance Distributed Computing, pp. 181–184. IEEE Press, New York (2001)
-
[The Physiology of the Grid], The Physiology of the Grid: an Open Grid Services Architecture for Distributed Systems Integration. Foster, I., Kesselman, C., Nick, J., Tuecke, S. Technical report, Global Grid Forum (2002)
-
[NCBI], National Center for Biotechnology Information, http://www.ncbi.nlm.nih.gov
-
[ISO 19101-1:2014], Geographic information — Reference model — Part 1: Fundamentals
-
[ISO 19115-1:2014], Geographic information — Metadata — Part 1: Fundamentals
-
[ISO 19139:2007], Geographic information — Metadata — XML schema implementation
-
[ISO 19115-3], Geographic information — Metadata — Part 3: XML schemas (2016)
-
[OGC 15-097], OGC Geospatial User Feedback Standard: Conceptual Model (2016)
-
[OGC 12-019], OGC City Geography Markup Language (CityGML) Encoding Standard (2012)
-
[OGC 06-121r9], OGC Web Service Common Implementation Specification, April 7, 2010. http://portal.opengeospatial.org/files/?artifact_id=38867
Terms and definitions
This document uses the terms defined in Sub-clause 5.3 of [OGC06-121r9], which is based on the ISO/IEC Directives, Part 2, Rules for the structure and drafting of International Standards. In particular, the word “shall” (not “must”) is the verb form used to indicate a requirement to be strictly followed to conform to this standard.
For the purposes of this document, the following additional terms and definitions apply.
example term
term used for exemplary purposes
Note
|
An example note. |
Conventions
This sections provides details and examples for any conventions used in the document. Examples of conventions are symbols, abbreviations, use of XML schema, or special notes regarding how to read the document.
Identifiers
The normative provisions in this standard are denoted by the URI
All requirements and conformance tests that appear in this document are denoted by partial URIs which are relative to this base.
Clauses not Containing Normative Material
Paragraph
Clauses not containing normative material sub-clause 1
Paragraph
Clauses not containing normative material sub-clause 2
Clause containing normative material
Paragraph
Requirement Class A or Requirement A Example
Paragraph – intro text for the requirement class.
Use the following table for Requirements Classes.
Requirements Class
-
urn:iso:ts:iso:19139:clause:6
requirement description
requirement description
requirement description
Requirement 1
Paragraph - intro text for the requirement.
Use the following table for Requirements, number sequentially.
Requirement 'shall' statement
Dictionary tables for requirements can be added as necessary. Modify the following example as needed.
Names | Definition | Data types and values | Multiplicity and use |
---|---|---|---|
name 1 |
definition of name 1 |
float |
One or more (mandatory) |
name 2 |
definition of name 2 |
character string type, not empty |
Zero or one (optional) |
name 3 |
definition of name 3 |
GML:: Point PropertyType |
One (mandatory) |
Media Types for any data encoding(s)
A section describing the MIME-types to be used is mandatory for any standard involving data encodings. If no suitable MIME type exists in http://www.iana.org/assignments/media-types/index.html then this section may be used to define a new MIME type for registration with IANA.
Appendix A: Conformance Class Abstract Test Suite (Normative)
Note
|
Ensure that there is a conformance class for each requirements class and a test for each requirement (identified by requirement name and number) |
Conformance Class A
Requirement 1
- Test purpose
-
Verify that…
- Test method
-
Inspect…
Requirement 2
Appendix B: Title
Note
|
Place other Annex material in sequential annexes beginning with "B" and leave final two annexes for the Revision History and Bibliography |
Appendix C: Revision History
Date | Release | Editor | Primary clauses modified | Description |
---|---|---|---|---|
2021-05-17 |
0.1 |
Matthew Purss |
all |
initial version |
Bibliography
Note
|
Example Bibliography (Delete this note).
The TC has approved Springer LNCS as the official document citation type. Springer LNCS is widely used in technical and computer science journals and other publications
– Actual References: [n] Journal: Author Surname, A.: Title. Publication Title. Volume number, Issue number, Pages Used (Year Published) [n] Web: Author Surname, A.: Title, http://Website-Url |